"Invisible" push button - for collapsible and coil-down hula hoops, a new innovation in hoop-making!
Lighter to the touch, easy on the fingers, manufactured parts are designed to make breaking down your hoop easier than ever. This two-part spring clip is made of galvanized music wire (that's the metal spring part) and nylon round-top push-button head. With less resistance in the spring, and a lower profile on the hoop, these push buttons will revolutionize the way you make your hoops.Can be used on both 3/4 and 5/8 hoop tubing, polypro or HDPE.
For instalation you will need 5 mm drill.
"Invisible" rivet - is superior to the metal rivet, utilizing a nylon bolt that pierces through 4 layers of polypro resulting in the most secure fastening method yet.
It's a 1" nylon bolt that goes right through both sides of the tubing, locking the internal tube in place (with two points of contact). One of the results is that any twisting stresses that could occur through use are greatly reduced.
Rivet lenght: 2,54 cm.
How to install the rivet - drill a hole through hoop and connector (you need 2,5 mm drill). Screw the rivet through the hole and cut the rest of the rivet.
SADA - 1 ks = 1 nýt a jeden push button, 50 ks = 50 nýtů a 50 push buttonů...
1378/STR
